Honeycomb board is a board made of two thinner panels firmly bonded to both sides of a thick honeycomb like core material, also known as a honeycomb sandwich structure. In addition, honeycomb panels also refer to panels that weld a large number of cutoff waveguides together to form a cutoff waveguide array, forming a large opening area and preventing electromagnetic wave leakage. A type of advanced building decoration material for exterior walls, originally mainly used in the aviation field, but now widely used in home decoration buildings.

Aluminum honeycomb panels have good performance and obvious advantages. Greater than bending stiffness and higher than bending strength, i.e. lightweight and high-strength; The flatness is very good, which can meet the requirements of large partition of building curtain walls and achieve good architectural performance with fewer building components; Various surface treatments available for selection; Excellent fire resistance; Having good sound absorption, sound insulation, thermal insulation, shock resistance and other functions; Good environmental friendliness, 100% recyclable.

What are the lubrication requirements for honeycomb panel production line equipment

Honeycomb board equipment needs to use lubricating oil for lubrication work like other mechanical equipment, in order to avoid losses and damage caused by friction of the honeycomb board equipment. There are several requirements for the lubrication of honeycomb panel equipment, which are also the basic requirements for adding lubricating oil to honeycomb panel equipment. For example, the sliding plate, guide sleeve, and other parts of the honeycomb cardboard equipment cross cutting machine need to be lubricated with lubricant at least 3 times. Secondly, it is an essential step to regularly add lubricants to the rotating parts of the honeycomb board equipment, such as bearings, adjusting sliders, sprockets, chains, gears, etc., every week. At the same time, the maintenance personnel of the honeycomb board equipment should inspect the entire honeycomb board equipment every 3 months to ensure that there are no abnormal situations with the equipment.

The center of the honeycomb panel is an aluminum hexagonal honeycomb, with interconnected honeycomb cores like countless I-beams. The core layers are distributed and fixed throughout the entire panel surface, making it less prone to shear, making the panel more stable, more resistant to bending and compression. Its wind resistance greatly exceeds that of aluminum plastic panels and aluminum veneers, and it also has the characteristics of being less prone to deformation and good flatness, even if the honeycomb panel size is large, High flatness can also be achieved due to the honeycomb core inside the honeycomb composite board being divided into numerous enclosed chambers, which blocks air flow and greatly hinders heat and sound waves. Therefore, it has the effect of insulation, insulation, and sound insulation.

PP honeycomb board has low material consumption, high specific strength and stiffness, and light weight. The geometric structure of the honeycomb forms a structure that resembles an arch bridge, thereby increasing the compressive strength on the surface by 100 times. The PP honeycomb panel adopts a honeycomb structure, which also requires less material consumption to achieve large volume, strength, and stiffness.